Southern State Sdn. Bhd.
9, 11 & 15, Lorong 1, Jalan Dewani, Off Jalan Tampoi, Majidee, 81100 Johor Bahru, Johor, Malaysia.
+607-332 1154 / 0984+607-334 3834
+607-331 6966
+6012-7966929(Mr. Yono/ Ms. Aini)
CEN 23 Oil-Mist NC IC Controlled
| Previous | 3 / 5 | Next |
- CEN23 vertical type electric lubricator has Taiwanese Patent No. 087855.
- The timer controls the operation and interval time. The electronic box has operation and interval indicators.
- The electronic box can automatically save the original operation and interval time while the power is suddenly off. After turning on the power, it would return to the original setting time and start the cycle again.
- It has a feed-oil button (F button), press the button and the oil will feed immediately.
- The discharge volume is stable and can be adjusted by the pressure-regulating valve. Turning the valve clockwise, the oil volume will increase, and turning anticlockwise, the oil volume will reduce.
- It used a high quality alloy steel gear pump and induction motor that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied for large machines' request.
- When the power of the lubricator turns off, the air pressure and output power will be turned off at the same time.
- It has a pressure-regulating valve, which can adjust the pressure and easy to check from the pressure gauge.
- It has a float switch that can detect the volume of oil. It will have abnormal signal when the oil level is lower than the standard.
- The function of CEN22, CEN23 types is similar to CEN24 (Horizontal), CEN25 (Vertical) types. The difference is CEN24, CEN25 types are without timer, and CEN22, CEN23 types are with timers.
